fuel cladding in a sentence

1. The main difference between these two types is in the fuel cladding material.
2. These are then stripped from the fuel cladding and into the coolant channel by the flow of water.
3. If the fuel cladding around the fuel develops holes, then fission products can leak into the primary coolant.
4. In January 2012 radiation was detected in the reactor's coolant water, caused by a microscopic breach in fuel cladding.
5. It is obvious that nuclear fuel could be damaged by film boiling; this would cause the fuel cladding to overheat and fail.
6. It's difficult to find fuel cladding in a sentence.
7. This caused the fuel cladding to fail, releasing the fuel elements into the coolant, and rupturing the channels in which these elements were located.
8. Both types used fuel cladding materials that were unsuitable for medium term storage under water, making reprocessing an essential part of the nuclear fuel cycle.
9. Occasionally, low-burnup spent fuel has been produced by a commercial LWR when an incident such as a fuel cladding failure has required early refuelling.
10. The individual lengths of fuel cladding were directed onto movable transports, where they were aligned coaxially with the axes of associated handling equipment at appropriate production stations.
11. The fuel cladding material was magnesium-zirconium alloy in the UNGG, as opposed to reprocessing of the fuel essential, and requiring heavily shielded facilities for this.
12. Additionally, a zinc activation product ( 65 Zn ) was found, which is thought to be due to the corrosion of magnox fuel cladding in spent fuel pools.
13. The zirconium alloy tubes are about 1 cm in diameter, and the fuel cladding gap is filled with helium gas to improve the conduction of heat from the fuel to the cladding.
14. The SLCS can also be injected during a LOCA or a fuel cladding failure to adjust the ph of the reactor coolant that has spilled, preventing the release of some radioactive materials.
15. Ideally the fertile fuel ( thorium or U-238 ) and other fuel components ( e . g . carrier salt or fuel cladding in solid fuels ) can also be reused for new fuel.
16. During power increases in the fuel pellet, the ceramic fuel material expands faster than the fuel cladding, and the jagged edges of the fuel pellet begin to press into the cladding, potentially causing a perforation.
More:   1  2